Land O' Lakes, FL
4.740 reviewsRated 4.7 out of 5 from 40 reviews
Refrigerator Repair · Dishwasher Repair · Washer Repair +5 more
Brand · Premium tier
Blomberg appliance repair
Blomberg builds refrigeration, freezers, dishwashers and laundry with a heavy slant toward compact, slim-depth and apartment-sized formats rather than full-width American cabinets. 1 directory business in 1 state names Blomberg among the brands serviced. Have the model and serial number ready — on a premium machine that is what decides which part the technician brings, and whether it is already on the van.
- Blomberg pros
- 1
- States
- 1
- Appliance lines
- 6
- Licensed
- 0
- Average rating
- 4.7
- Price tier
- Premium
Top-rated Blomberg repair pros
The only listed business servicing Blomberg.
What servicing a Blomberg involves
Price tier and parts channel decide who can realistically do the work — read this before you compare quotes.
Most of what makes a Blomberg different to service is dimensional. Slim-depth and 24-inch machines carry full-size mechanicals in a smaller cabinet, so the labour goes into access — panels, brackets, and sometimes pulling the machine out of its opening — rather than into diagnosis. That matters when you compare a quote against a full-width equivalent, because the same failed pump can be an hour's more work here while the part costs the same. Ventless laundry is the second difference. A heat-pump dryer runs a sealed refrigerant circuit and a condenser dryer runs a heat exchanger, and neither behaves like the vented machine most technicians see all day.
- Price tier
- Premium · 1.5× typical new price
- Parts usually come from
- Retailers and brand distributors
- Brand-authorised technician
- Not usually required
- Appliance lines built
- 6
Who can do the work
Most independent technicians work on this tier, but ask whether they have had factory training on the line. Control boards, inverter drives and door mechanisms diverge enough between premium platforms that experience is not interchangeable.
Before you call about your Blomberg
- Ask whether removing the machine from its opening and refitting it is inside the labour figure. On a slim-depth built-in it frequently is not.
- Compact laundry is often stacked or closeted with no service clearance. Say how yours is installed when you book — it changes how long the visit takes.
- On a ventless dryer, empty the water container, clean both lint filters and rinse the condenser before deciding the machine is faulty. Long cycles usually start there.
- Confirm the technician has serviced ventless laundry. A vented dryer's fault tree does not transfer to one.
- The rating plate on compact machines is often on the door frame or behind the kick plate rather than anywhere obvious. Photograph it once and keep it.
- Parts generally come through a distributor, so ask about lead time in the same call as the price.
Blomberg appliance lines, and who services them here
What the nameplate covers, against how many listed businesses actually repair that category.
| Appliance | Blomberg line | Listed pros | Parts |
|---|---|---|---|
| Dishwasher repair | Yes | 1 | Parts & prices |
| Dryer repair | Yes | 1 | Parts & prices |
| Freezer repair | Yes | 1 | Parts & prices |
| Oven & Range repair | Yes | 1 | Parts & prices |
| Refrigerator repair | Yes | 1 | Parts & prices |
| Washer repair | Yes | 1 | Parts & prices |
Common faults on Blomberg categories
67 step-by-step guides cover the categories Blomberg builds, spread across 6 of them below. Work through one before you pay a diagnostic fee.
Refrigerator Not Cooling
RefrigeratorModerate45–90 minutesDIY $0–$150Pro $150–$900
If the coils are clean, both fans run, the defrost circuit tests good and the compressor runs continuously without the evaporator ever getting cold, you are looking at the sealed system — a low refrigerant charge, a restriction in the capillary tube, or a compressor that has lost compression. Telltale signs are a suction line that never gets cold to the touch, frost on only the first few inches of the evaporator, or an oily residue around a weld joint. Opening that system legally requires EPA Section 608 certification and recovery equipment, so it is not a DIY repair. Expect $400–$900, and get that quote before committing on a unit over ten years old.
Freezer Frost Buildup
FreezerModerate45–90 minutes plus a 24-hour defrostDIY $15–$150Pro $150–$450
If the heater, thermostat and drain all check out and the coil still ices over, the control board is not commanding a defrost cycle, and that is a board diagnosis worth paying for rather than guessing at. Call a professional immediately, and do not run the unit, if you find an oily residue anywhere on the evaporator or the tubing — that indicates a refrigerant leak, and sealed-system repair legally requires EPA Section 608 certification. On a chest or upright freezer over ten years old, get the sealed-system quote before assuming repair is the right call.
Dishwasher Not Cleaning
DishwasherEasy30–60 minutesDIY $0–$70Pro $120–$400
If the filter, arms and inlet are all clear, the fill level and water temperature are correct, and the machine still leaves food on the dishes, the wash pump or its diverter valve is the likely fault — and on machines that route water between the upper and lower arms with a motorised diverter, a failed diverter starves one rack while the other cleans normally. Diagnosing that properly means running the service test cycle, which is worth paying for rather than replacing pumps on a guess. Grinding from the pump, or a burnt smell during the wash phase, means stop using the machine and get it looked at.
Washer Won't Drain
WasherModerate45–90 minutesDIY $0–$130Pro $150–$400
If the drain path is completely clear, the pump impeller turns freely, and the pump is still silent when the machine calls for drain, the fault is in the wiring harness, the motor control or the main board — and boards run $150–$400, are rarely returnable once fitted, and are not worth buying on a guess. A burnt-plastic smell from the pump area means the motor has failed and, more importantly, that something ran it stalled for a long time, so find the obstruction before fitting the new part. Water backing up out of the standpipe is a plumbing job, not an appliance repair.
Dryer Not Heating
DryerModerate45–120 minutesDIY $5–$70Pro $150–$400
On a gas dryer, anything past swapping the igniter, flame sensor or valve coils — adjusting the burner, opening the gas valve body, or touching the supply line — is licensed trade work in most jurisdictions and should not be attempted at home. On an electric dryer, get an electrician rather than an appliance technician if the outlet, cord or terminal block shows scorching, if a leg of the 240-volt supply is genuinely missing, or if the breaker trips the moment the element energises. And if every heating component tests good but the element still never gets power, the fault is in the timer or the control board — a diagnosis worth paying for rather than guessing at.
Oven Not Heating Evenly
Oven & RangeModerate45–90 minutes plus preheat timeDIY $0–$80Pro $150–$400
If the elements test good, the sensor matches its chart, the door seals and the oven still cannot hold a steady temperature, the relays on the control board that switch the elements are the usual remaining suspect — and a board is worth having confirmed by measurement before you buy one, since they run $150–$400 and are rarely returnable once fitted. On a gas oven, uneven baking that comes from a partially blocked burner tube, an incorrect orifice, or a burner that lights unevenly along its length is licensed trade work; a yellow, lifting or lazy flame in particular should be looked at by a qualified technician rather than adjusted at home.
Refrigerator Leaking Water
RefrigeratorModerate30–90 minutesDIY $0–$80Pro $150–$400
If the leak is coming from the sealed system — an oily residue around a weld joint, or frost forming on the suction line — stop. That is refrigerant, and repairing it requires EPA Section 608 certification and recovery equipment. Likewise, if you have cleared the drain twice and it keeps freezing solid, the defrost heater or defrost thermostat is failing and the whole defrost circuit needs testing.
Freezer Not Freezing
FreezerModerate45–90 minutesDIY $0–$150Pro $150–$900
If the coils are clean, both fans run, the seal is good, the relay is fine and the compressor runs continuously without the cabinet getting cold, the fault is in the sealed system — low refrigerant, a restriction, or a failing compressor. That work legally requires EPA Section 608 certification and typically costs $400 to $900. Weigh that carefully: a new chest freezer starts around $250 and a new upright around $500, so on a unit over eight years old, replacement is very often the better call. Get a written quote before authorising sealed-system work.
59 more guides cover the categories Blomberg builds. Browse the full library.
Blomberg parts: cost and where to buy
OEM parts cost noticeably more and the aftermarket is thinner, so expect an order-and-return visit on anything past the common failures. Because the machine is worth more, a part that would total a budget unit is often still the right call here.
For Blomberg, parts are usually sourced through retailers and brand distributors. Aftermarket equivalents exist for many components; ask whether a quote is OEM or aftermarket and what warranty comes with the part.
| Part | Appliance | Typical price | DIY difficulty |
|---|---|---|---|
| Water Filter | Refrigerator | $25–$60 | Easy |
| Door Gasket | Refrigerator | $30–$80 | Easy |
| Condenser Fan Motor | Refrigerator | $50–$150 | Moderate |
| Thermal Fuse | Dryer | $5–$20 | Easy |
| Heating Element | Dryer | $20–$60 | Moderate |
| Drain Pump | Washer | $30–$80 | Moderate |
| Lid Switch | Washer | $15–$40 | Easy |
| Spray Arm | Dishwasher | $15–$40 | Easy |
| Inlet Valve | Dishwasher | $15–$40 | Moderate |
| Bake Element | Oven & Range | $15–$40 | Easy |
| Oven Temperature Sensor | Oven & Range | $15–$30 | Easy |
| Evaporator Fan Motor | Refrigerator | $40–$120 | Moderate |
| Start Relay and Overload | Refrigerator | $12–$45 | Easy |
| Water Inlet Valve | Refrigerator | $30–$95 | Moderate |
| Defrost Thermostat | Refrigerator | $15–$50 | Moderate |
| Defrost Heater | Refrigerator | $30–$95 | Advanced |
| Thermistor | Refrigerator | $10–$35 | Moderate |
| Ice Maker Assembly | Refrigerator | $80–$260 | Moderate |
| Main Control Board | Refrigerator | $90–$340 | Moderate |
| Door Lock Assembly | Washer | $40–$140 | Moderate |
| Drive Belt | Washer | $15–$50 | Moderate |
| Water Inlet Valve | Washer | $25–$85 | Moderate |
| Shock Absorbers and Suspension Rods | Washer | $30–$100 | Moderate |
| Motor Coupler | Washer | $15–$45 | Moderate |
| Door Boot Seal | Washer | $60–$190 | Advanced |
| Tub Bearing Kit | Washer | $35–$160 | Advanced |
| Cycling and High-Limit Thermostats | Dryer | $10–$40 | Easy |
| Drive Belt | Dryer | $12–$45 | Moderate |
| Drum Rollers and Idler Pulley | Dryer | $20–$70 | Moderate |
| Gas Igniter | Dryer | $20–$65 | Moderate |
| Gas Valve Coil Kit | Dryer | $20–$65 | Moderate |
| Door Switch | Dryer | $10–$40 | Easy |
| Blower Wheel | Dryer | $20–$70 | Moderate |
| Moisture Sensor Bars | Dryer | $15–$50 | Easy |
| Drain Pump | Dishwasher | $35–$120 | Moderate |
| Door Latch and Switch Assembly | Dishwasher | $20–$80 | Easy |
| Heating Element | Dishwasher | $25–$85 | Moderate |
| Float Switch | Dishwasher | $10–$35 | Easy |
| Door Gasket | Dishwasher | $20–$75 | Easy |
| Rack Roller and Adjuster Kit | Dishwasher | $12–$50 | Easy |
| Detergent Dispenser | Dishwasher | $30–$100 | Moderate |
| Circulation Pump and Motor | Dishwasher | $90–$330 | Advanced |
| Broil Element | Oven & Range | $20–$75 | Easy |
| Oven Igniter | Oven & Range | $25–$90 | Moderate |
| Surface Burner Igniter | Oven & Range | $20–$95 | Moderate |
| Radiant Surface Element | Oven & Range | $25–$100 | Moderate |
| Infinite Switch | Oven & Range | $20–$70 | Moderate |
| Oven Door Gasket | Oven & Range | $20–$80 | Easy |
| Oven Door Hinges | Oven & Range | $30–$120 | Moderate |
| Electronic Control Board | Oven & Range | $90–$380 | Moderate |
| Start Relay and Overload | Freezer | $12–$45 | Easy |
| Door Gasket | Freezer | $40–$140 | Easy |
| Temperature Control Thermostat | Freezer | $25–$90 | Moderate |
| Defrost Thermostat | Freezer | $15–$50 | Moderate |
| Defrost Timer | Freezer | $25–$80 | Moderate |
| Evaporator Fan Motor | Freezer | $40–$130 | Moderate |
| Defrost Heater | Freezer | $30–$100 | Advanced |
| Lid Hinge and Lock | Freezer | $12–$60 | Easy |
Prices are typical ranges for the category, not Blomberg quotes. Expect OEM components on this tier to sit at or above the top of each range.
Blomberg repair by state
Every state with a listed Blomberg business. Each opens the full list for that state with ratings, licensing and phone numbers.
More ways to find a Blomberg technician
Only 1 listed business names Blomberg directly. These indexes cover the whole directory — most general technicians will take the job. Ask when you call.
By appliance
Refrigerator repair676Dryer repair674Washer repair673Oven & Range repair672Dishwasher repair664Freezer repair402Microwave repair209Ice Maker repair147Garbage Disposal repair110Wine Cooler repair56Range Hood repair24Trash Compactor repair14
By state
Alabama AL18Alaska AK9Arizona AZ21Arkansas AR11California CA53Colorado CO24Connecticut CT16Delaware DE9Florida FL44Georgia GA19Hawaii HI13Idaho ID18Illinois IL18Indiana IN20Iowa IA9Kansas KS15Kentucky KY14Louisiana LA17Maine ME8Maryland MD16Massachusetts MA15Michigan MI24Minnesota MN21Mississippi MS11Missouri MO16Montana MT10Nebraska NE15Nevada NV13New Hampshire NH9New Jersey NJ18New Mexico NM9New York NY20North Carolina NC25North Dakota ND8Ohio OH29Oklahoma OK14Oregon OR17Pennsylvania PA21Rhode Island RI8South Carolina SC15South Dakota SD9Tennessee TN22Texas TX58Utah UT12Vermont VT8Virginia VA22Washington WA19West Virginia WV10Wisconsin WI15Wyoming WY8
Blomberg repair — common questions
Do I need a technician authorised by Blomberg, or will any repair company do?
Blomberg sits in the premium tier. Most independent technicians work on this tier, but ask whether they have had factory training on the line. Control boards, inverter drives and door mechanisms diverge enough between premium platforms that experience is not interchangeable. While the appliance is still inside its warranty period, check the manufacturer's terms before you book anyone — using an unauthorised technician can affect a warranty claim.
Are Blomberg parts expensive, and where do they come from?
OEM parts cost noticeably more and the aftermarket is thinner, so expect an order-and-return visit on anything past the common failures. Because the machine is worth more, a part that would total a budget unit is often still the right call here. For Blomberg specifically, parts are usually sourced through: Retailers and brand distributors. Whoever you use will need the full model and serial number from the data plate to order the right component.
Why is a repair on my 24-inch machine quoted higher than on a full-size one?
Because access is most of the labour. Compact machines fit full-size mechanicals into a smaller cabinet, and a component a technician reaches in ten minutes on a 27-inch washer can need panels, a bracket, and sometimes the machine pulled out of its opening. The part costs the same; the hours do not. Ask for labour to be estimated separately, and ask specifically whether removal and refit sit inside it.
Does a ventless Blomberg dryer need a specialist?
It needs somebody who has worked on one, which is not quite the same thing. A heat-pump dryer contains a sealed refrigerant circuit — closer to a refrigerator than to a vented dryer — and sealed-system work on it requires EPA 608 certification. Most routine faults are not sealed-system faults, but you want a technician who knows which is which before they start pricing components.
The dryer runs a full cycle and the clothes are still damp. Fault or not?
Check the three homeowner-serviceable things first: the water container, both lint filters and the condenser. A ventless dryer moves moisture into a container or a drain rather than out through a wall, and any restriction in that path shows up as a long cycle with no error message at all. If all three are clean and cycles are still long, describe it exactly that way when you call — it points the technician at the fan and the refrigerant circuit rather than at the heater.
How do I find Blomberg repair near me?
This page lists 1 listed business across 1 state whose profile names Blomberg among the brands they service, ranked by rating and then review count. Every listing carries a direct phone number — there is no lead form and no referral fee. Compare two or three on rating, licensing and years in business, then call the one that explains the fault most clearly.
Which Blomberg appliances can be repaired?
Blomberg builds refrigeration, freezers, dishwashers and laundry with a heavy slant toward compact, slim-depth and apartment-sized formats rather than full-width American cabinets. Listed Blomberg pros currently cover refrigerator, washer, dryer, dishwasher, oven & range, freezer. As a rule of thumb, repair is the better value when the quote comes in under half the replacement price and the machine still has a meaningful share of its expected life left.
What should I have ready before I call about my Blomberg appliance?
The model and serial number from the data plate — photograph it, do not transcribe it. Then the error code if the machine shows one, when the fault started, and whether anything changed just before it did. Ask whether removing the machine from its opening and refitting it is inside the labour figure. On a slim-depth built-in it frequently is not. That is usually enough for a technician to quote accurately over the phone instead of quoting a range.
Is it worth repairing my Blomberg appliance, or should I replace it?
Machines built to be repaired rather than replaced, which changes the calculation on an expensive part. The site's value estimator prices premium machines at 1.5× a category's typical new price, then depreciates from there, which is the honest way to frame the decision: compare the quoted repair against what the machine is worth today, not against what it cost new. Ask for parts and labour as separate figures so you can see which one is driving the total.
Related listings and searches
Need Blomberg repair?
Every business on ApplianceRepairListing is listed free and answers its own phone. Compare two or three, confirm licensing, ask whether the part is OEM or aftermarket, and book the one that explains the fault clearly.