Skip to content
ApplianceRepairListing
EmergencySymptomsDIY GuidesCostsPartsBrands
Browse all listingsAppliance Blue Book
List your business

Brand · Budget tier

Hotpoint appliance repair

Hotpoint covers refrigeration, freezers, laundry, dishwashers and ranges — a plain, builder-grade household line. 9 directory businesses in 7 states name Hotpoint among the brands serviced. Have the model and serial number ready — on a budget machine that is what decides which part the technician brings, and whether it is already on the van.

Hotpoint pros
9
States
7
Appliance lines
6
Licensed
8
Average rating
4.6
Price tier
Budget

Top-rated Hotpoint repair pros

All 9 listed businesses servicing Hotpoint, sorted by rating then review count.

Advertisement

What servicing a Hotpoint involves

Price tier and parts channel decide who can realistically do the work — read this before you compare quotes.

There is no complication to report here, and that is worth stating rather than dressing up. Hotpoint machines are mechanically straightforward, their components are stocked by general parts retailers, and any licensed appliance technician can take the job without a brand account or an authorisation. Most calls resolve on a single visit because the failures are ordinary and the parts are ordinary. The only judgement you have to make is economic rather than technical: these are inexpensive machines, so a repair that is cheap in absolute terms can still be poor value if it is the second one this year. Ask for parts and labour as two figures and that decision makes itself.

Price tier
Budget · 0.7× typical new price
Parts usually come from
General parts retailers
Brand-authorised technician
Not usually required
Appliance lines built
6

Who can do the work

Any qualified appliance technician can work on these. There is no authorised-only network to hunt down, so choose on rating, licensing and how clearly the technician explains the fault.

Before you call about your Hotpoint

  • Describe the symptom rather than the appliance. On machines this simple, tumbles but no heat or fills but will not spin usually identifies the part before anyone arrives.
  • A dryer that tumbles without heating has lost the heat circuit, and the thermal fuse sits in it. The fuse opens because venting is restricted, so clearing the vent is part of the repair rather than an extra.
  • A range element that will not heat is usually the element or its terminal block, both inexpensive and quick. Say which element and whether it glows at all.
  • Ask for parts cost and labour cost separately so you can weigh the repair against a budget machine's replacement price.
  • No authorisation, no brand parts account, no factory tool. Choose on licensing, rating and how clearly the shop explains the fault.
  • A long quoted lead time on a common component is worth questioning here — availability is normally not the constraint.

Hotpoint appliance lines, and who services them here

What the nameplate covers, against how many listed businesses actually repair that category.

Hotpoint appliance categories with listed repair business counts and links to parts.
ApplianceHotpoint lineListed prosParts
Dryer repairYes9Parts & prices
Oven & Range repairYes9Parts & prices
Refrigerator repairYes9Parts & prices
Washer repairYes9Parts & prices
Dishwasher repairYes8Parts & prices
Freezer repairYes4Parts & prices
Microwave repairNot this brand6Parts & prices
Ice Maker repairNot this brand2Parts & prices
Garbage Disposal repairNot this brand1Parts & prices
Wine Cooler repairNot this brand1Parts & prices

Common faults on Hotpoint categories

67 step-by-step guides cover the categories Hotpoint builds, spread across 6 of them below. Work through one before you pay a diagnostic fee.

All guides →

Refrigerator Not Cooling

RefrigeratorModerate45–90 minutesDIY $0–$150Pro $150–$900

If the coils are clean, both fans run, the defrost circuit tests good and the compressor runs continuously without the evaporator ever getting cold, you are looking at the sealed system — a low refrigerant charge, a restriction in the capillary tube, or a compressor that has lost compression. Telltale signs are a suction line that never gets cold to the touch, frost on only the first few inches of the evaporator, or an oily residue around a weld joint. Opening that system legally requires EPA Section 608 certification and recovery equipment, so it is not a DIY repair. Expect $400–$900, and get that quote before committing on a unit over ten years old.

Freezer Frost Buildup

FreezerModerate45–90 minutes plus a 24-hour defrostDIY $15–$150Pro $150–$450

If the heater, thermostat and drain all check out and the coil still ices over, the control board is not commanding a defrost cycle, and that is a board diagnosis worth paying for rather than guessing at. Call a professional immediately, and do not run the unit, if you find an oily residue anywhere on the evaporator or the tubing — that indicates a refrigerant leak, and sealed-system repair legally requires EPA Section 608 certification. On a chest or upright freezer over ten years old, get the sealed-system quote before assuming repair is the right call.

Washer Won't Drain

WasherModerate45–90 minutesDIY $0–$130Pro $150–$400

If the drain path is completely clear, the pump impeller turns freely, and the pump is still silent when the machine calls for drain, the fault is in the wiring harness, the motor control or the main board — and boards run $150–$400, are rarely returnable once fitted, and are not worth buying on a guess. A burnt-plastic smell from the pump area means the motor has failed and, more importantly, that something ran it stalled for a long time, so find the obstruction before fitting the new part. Water backing up out of the standpipe is a plumbing job, not an appliance repair.

Dryer Not Heating

DryerModerate45–120 minutesDIY $5–$70Pro $150–$400

On a gas dryer, anything past swapping the igniter, flame sensor or valve coils — adjusting the burner, opening the gas valve body, or touching the supply line — is licensed trade work in most jurisdictions and should not be attempted at home. On an electric dryer, get an electrician rather than an appliance technician if the outlet, cord or terminal block shows scorching, if a leg of the 240-volt supply is genuinely missing, or if the breaker trips the moment the element energises. And if every heating component tests good but the element still never gets power, the fault is in the timer or the control board — a diagnosis worth paying for rather than guessing at.

Dishwasher Not Cleaning

DishwasherEasy30–60 minutesDIY $0–$70Pro $120–$400

If the filter, arms and inlet are all clear, the fill level and water temperature are correct, and the machine still leaves food on the dishes, the wash pump or its diverter valve is the likely fault — and on machines that route water between the upper and lower arms with a motorised diverter, a failed diverter starves one rack while the other cleans normally. Diagnosing that properly means running the service test cycle, which is worth paying for rather than replacing pumps on a guess. Grinding from the pump, or a burnt smell during the wash phase, means stop using the machine and get it looked at.

Oven Not Heating Evenly

Oven & RangeModerate45–90 minutes plus preheat timeDIY $0–$80Pro $150–$400

If the elements test good, the sensor matches its chart, the door seals and the oven still cannot hold a steady temperature, the relays on the control board that switch the elements are the usual remaining suspect — and a board is worth having confirmed by measurement before you buy one, since they run $150–$400 and are rarely returnable once fitted. On a gas oven, uneven baking that comes from a partially blocked burner tube, an incorrect orifice, or a burner that lights unevenly along its length is licensed trade work; a yellow, lifting or lazy flame in particular should be looked at by a qualified technician rather than adjusted at home.

Refrigerator Leaking Water

RefrigeratorModerate30–90 minutesDIY $0–$80Pro $150–$400

If the leak is coming from the sealed system — an oily residue around a weld joint, or frost forming on the suction line — stop. That is refrigerant, and repairing it requires EPA Section 608 certification and recovery equipment. Likewise, if you have cleared the drain twice and it keeps freezing solid, the defrost heater or defrost thermostat is failing and the whole defrost circuit needs testing.

Freezer Not Freezing

FreezerModerate45–90 minutesDIY $0–$150Pro $150–$900

If the coils are clean, both fans run, the seal is good, the relay is fine and the compressor runs continuously without the cabinet getting cold, the fault is in the sealed system — low refrigerant, a restriction, or a failing compressor. That work legally requires EPA Section 608 certification and typically costs $400 to $900. Weigh that carefully: a new chest freezer starts around $250 and a new upright around $500, so on a unit over eight years old, replacement is very often the better call. Get a written quote before authorising sealed-system work.

59 more guides cover the categories Hotpoint builds. Browse the full library.

Hotpoint parts: cost and where to buy

Components are inexpensive and stocked by every general parts retailer, so a pump, a lid switch or a thermal fuse is a same-week fix. The trap is labour: a $250 repair bill against a $450 machine is rarely worth authorising, so ask for the parts figure and the labour figure separately.

All parts suppliers →

For Hotpoint, parts are usually sourced through general parts retailers. Aftermarket equivalents exist for many components; ask whether a quote is OEM or aftermarket and what warranty comes with the part.

Commonly replaced parts for the Hotpoint categories the parts library covers, with typical prices and DIY difficulty.
PartApplianceTypical priceDIY difficulty
Water FilterRefrigerator$25–$60Easy
Door GasketRefrigerator$30–$80Easy
Condenser Fan MotorRefrigerator$50–$150Moderate
Thermal FuseDryer$5–$20Easy
Heating ElementDryer$20–$60Moderate
Drain PumpWasher$30–$80Moderate
Lid SwitchWasher$15–$40Easy
Spray ArmDishwasher$15–$40Easy
Inlet ValveDishwasher$15–$40Moderate
Bake ElementOven & Range$15–$40Easy
Oven Temperature SensorOven & Range$15–$30Easy
Evaporator Fan MotorRefrigerator$40–$120Moderate
Start Relay and OverloadRefrigerator$12–$45Easy
Water Inlet ValveRefrigerator$30–$95Moderate
Defrost ThermostatRefrigerator$15–$50Moderate
Defrost HeaterRefrigerator$30–$95Advanced
ThermistorRefrigerator$10–$35Moderate
Ice Maker AssemblyRefrigerator$80–$260Moderate
Main Control BoardRefrigerator$90–$340Moderate
Door Lock AssemblyWasher$40–$140Moderate
Drive BeltWasher$15–$50Moderate
Water Inlet ValveWasher$25–$85Moderate
Shock Absorbers and Suspension RodsWasher$30–$100Moderate
Motor CouplerWasher$15–$45Moderate
Door Boot SealWasher$60–$190Advanced
Tub Bearing KitWasher$35–$160Advanced
Cycling and High-Limit ThermostatsDryer$10–$40Easy
Drive BeltDryer$12–$45Moderate
Drum Rollers and Idler PulleyDryer$20–$70Moderate
Gas IgniterDryer$20–$65Moderate
Gas Valve Coil KitDryer$20–$65Moderate
Door SwitchDryer$10–$40Easy
Blower WheelDryer$20–$70Moderate
Moisture Sensor BarsDryer$15–$50Easy
Drain PumpDishwasher$35–$120Moderate
Door Latch and Switch AssemblyDishwasher$20–$80Easy
Heating ElementDishwasher$25–$85Moderate
Float SwitchDishwasher$10–$35Easy
Door GasketDishwasher$20–$75Easy
Rack Roller and Adjuster KitDishwasher$12–$50Easy
Detergent DispenserDishwasher$30–$100Moderate
Circulation Pump and MotorDishwasher$90–$330Advanced
Broil ElementOven & Range$20–$75Easy
Oven IgniterOven & Range$25–$90Moderate
Surface Burner IgniterOven & Range$20–$95Moderate
Radiant Surface ElementOven & Range$25–$100Moderate
Infinite SwitchOven & Range$20–$70Moderate
Oven Door GasketOven & Range$20–$80Easy
Oven Door HingesOven & Range$30–$120Moderate
Electronic Control BoardOven & Range$90–$380Moderate
Start Relay and OverloadFreezer$12–$45Easy
Door GasketFreezer$40–$140Easy
Temperature Control ThermostatFreezer$25–$90Moderate
Defrost ThermostatFreezer$15–$50Moderate
Defrost TimerFreezer$25–$80Moderate
Evaporator Fan MotorFreezer$40–$130Moderate
Defrost HeaterFreezer$30–$100Advanced
Lid Hinge and LockFreezer$12–$60Easy

Prices are typical ranges for the category, not Hotpoint quotes. OEM parts sit toward the top of each range; aftermarket toward the bottom.

Refrigerator partsFreezer partsWasher partsDryer partsDishwasher partsOven & Range parts

Hotpoint repair by state

Every state with a listed Hotpoint business. Each opens the full list for that state with ratings, licensing and phone numbers.

Arkansas AR1Florida FL3Georgia GA1Illinois IL1Michigan MI1New Mexico NM1Ohio OH1

Hotpoint repair — common questions

Do I need a technician authorised by Hotpoint, or will any repair company do?
Hotpoint sits in the budget tier. Any qualified appliance technician can work on these. There is no authorised-only network to hunt down, so choose on rating, licensing and how clearly the technician explains the fault. While the appliance is still inside its warranty period, check the manufacturer's terms before you book anyone — using an unauthorised technician can affect a warranty claim.
Are Hotpoint parts expensive, and where do they come from?
Components are inexpensive and stocked by every general parts retailer, so a pump, a lid switch or a thermal fuse is a same-week fix. The trap is labour: a $250 repair bill against a $450 machine is rarely worth authorising, so ask for the parts figure and the labour figure separately. For Hotpoint specifically, parts are usually sourced through: General parts retailers. Whoever you use will need the full model and serial number from the data plate to order the right component.
The dryer turns but does not get hot. What is it, and what should it cost?
The heat circuit has opened somewhere, and on a simple dryer that is usually the thermal fuse, the heating element or a thermostat — all inexpensive parts with short labour. The more useful question is why. A thermal fuse is a safety device that opens when the machine overheats, and the usual reason a dryer overheats is a restricted vent or lint path. Ask whether the vent is being checked as part of the job; if it is not, the same fuse will go again.
Is there anything unusual about servicing a Hotpoint?
No, and the plain answer is the useful one rather than a dodge. There is no authorised-only network, no restricted parts account, no special diagnostic tool, and no unusual engineering to work around. Any licensed appliance technician can diagnose it and buy the components. What you are choosing on is the ordinary set of criteria — licensing, rating, clarity of explanation, and what warranty is offered on the part and the labour.
At what point should I stop repairing one?
Use the arithmetic rather than a rule about the brand. This site's estimator values budget-tier machines at 0.7x a category's typical new price before depreciating for age, so the machine's current worth drops quickly. A single cheap repair on an otherwise sound machine is almost always right. A large one, or a second unrelated failure inside a year, usually is not — not because the fix would fail, but because you would be funding maintenance the machine cannot justify.
How do I find Hotpoint repair near me?
This page lists 9 listed businesses across 7 states whose profile names Hotpoint among the brands they service, ranked by rating and then review count. Every listing carries a direct phone number — there is no lead form and no referral fee. Compare two or three on rating, licensing and years in business, then call the one that explains the fault most clearly.
Which Hotpoint appliances can be repaired?
Hotpoint covers refrigeration, freezers, laundry, dishwashers and ranges — a plain, builder-grade household line. Listed Hotpoint pros currently cover refrigerator, washer, dryer, oven & range, dishwasher, microwave and more. As a rule of thumb, repair is the better value when the quote comes in under half the replacement price and the machine still has a meaningful share of its expected life left.
What should I have ready before I call about my Hotpoint appliance?
The model and serial number from the data plate — photograph it, do not transcribe it. Then the error code if the machine shows one, when the fault started, and whether anything changed just before it did. Describe the symptom rather than the appliance. On machines this simple, tumbles but no heat or fills but will not spin usually identifies the part before anyone arrives. That is usually enough for a technician to quote accurately over the phone instead of quoting a range.
Is it worth repairing my Hotpoint appliance, or should I replace it?
Value nameplates. The machine is cheap to buy, which is exactly why the repair-or-replace maths turns against you early. The site's value estimator prices budget machines at 0.7× a category's typical new price, then depreciates from there, which is the honest way to frame the decision: compare the quoted repair against what the machine is worth today, not against what it cost new. Ask for parts and labour as separate figures so you can see which one is driving the total.

Need Hotpoint repair?

Every business on ApplianceRepairListing is listed free and answers its own phone. Compare two or three, confirm licensing, ask whether the part is OEM or aftermarket, and book the one that explains the fault clearly.

Browse all prosList your business