Mr. Ed's Appliance Service and Sales
18 yrs in businessAlbuquerque, NM
4.740 reviewsRated 4.7 out of 5 from 40 reviews
Washer Repair · Dryer Repair · Oven & Range Repair +2 more
LicensedInsured
Hotpoint · New Mexico · Budgettier · 6th of 7 states
Hotpoint repair in New Mexico
1 of the 9 businesses listed in New Mexico — 11% — names Hotpoint among the brands serviced, across 1 city with an index page. That is 6th of the 7 states with any, out of 9 nationwide. Ranked by rating, then review count.
Hotpoint sits in the budget tier, so any qualified New Mexico technician can take the job. Have the model and serial number from the data plate ready — it is what decides whether the part is already on the van.
- Hotpoint pros
- 1
- State rank
- 6th
- Cities
- 1
- Average rating
- 4.7
- Licensed
- 1
- 24/7 emergency
- 0
- Reviews
- 40
Hotpoint repair pros in New Mexico
Sorted by rating, then review count. Call the number on the listing — no forms, no lead fees.
Advertisement
Only 1 listing for Hotpoint in New Mexico
New Mexico ranks 6th of the 7 states carrying Hotpoint, against 3 in Florida. Thin coverage here is a limit of this directory rather than a statement about the market: 8 other businesses are listed in New Mexico, and at this tier most of them can take a Hotpoint job — ask when you call.
What the listings say about Hotpoint repair in New Mexico
Counted from the 1 profile above, not from a survey. Everything a business states about itself is reported as a claim.
New Mexico holds a single listed Hotpoint business, out of 9 nationwide. That ranks 6th of the 7 states with any, level with Michigan and behind Florida on 3. It is 1 of the 9 businesses listed in New Mexico — 11% of the state directory.
It carries a 4.7 rating, against 4.6 across all 9 listed nationwide. It carries 40 reviews. Rating and review volume are what the businesses' own public profiles report — treat a high average on six reviews differently from the same average on six hundred.
The listed business states that it is licensed and states that it carries insurance. Its profile also states a Better Business Bureau accreditation. It does not advertise round-the-clock cover, so call early in the day and ask directly. All of that is self-stated in the listing, not verified here: ask for the license number and a current certificate of insurance, and for anything that opens a sealed refrigerant system ask to see federal EPA Section 608 certification, which is required in all fifty states.
It has been trading since 2008 — 18 years. It works out of Albuquerque. It names 6 distinct towns, suburbs and neighborhoods in its stated service area, so its reach is wider than the town it sits in — give your address when you call.
| Measure | New Mexico |
|---|---|
| Listed prosof 9 nationwide for Hotpoint | 1 |
| Rank among statesFlorida leads on 3 | 6th of 7 |
| Share of the New Mexico directory1 of 9 listed businesses | 11% |
| Average rating4.6 nationwide · 1 rated 4.5+ | 4.7 |
| Reviews on filemost on one profile: 40 | 40 |
| State licensing claimed1 also states insurance | 1 of 1 |
| Accreditation statedself-stated in the listing, verify before booking | 1 BBB |
| 24/7 emergencyask when you call | 0 of 1 |
| Longest trading sincemedian 18 years across 1 that publishes one | 2008 |
| Cities with an index pageAlbuquerque leads on 1 | 1 |
| Towns named in service areasclaimed coverage, not a guarantee — confirm your address | 6 |
Booking Hotpoint service in New Mexico
The brand decides the parts route and the labour skill; the state decides the labour rate and the drive time. Both matter, and only one of them is on the quote.
There is no complication to report here, and that is worth stating rather than dressing up. Hotpoint machines are mechanically straightforward, their components are stocked by general parts retailers, and any licensed appliance technician can take the job without a brand account or an authorisation. Most calls resolve on a single visit because the failures are ordinary and the parts are ordinary. The only judgement you have to make is economic rather than technical: these are inexpensive machines, so a repair that is cheap in absolute terms can still be poor value if it is the second one this year. Ask for parts and labour as two figures and that decision makes itself.
- Price tier
- Budget · 0.7× typical new price
- Parts usually come from
- General parts retailers
- Brand-authorised technician
- Not usually required
- Stated a factory credential here
- 0 of 1
- Names Hotpoint in a certification
- 0 of 1
- Licensed in New Mexico
- 1 of 1
- Describe the symptom rather than the appliance. On machines this simple, tumbles but no heat or fills but will not spin usually identifies the part before anyone arrives.
- A dryer that tumbles without heating has lost the heat circuit, and the thermal fuse sits in it. The fuse opens because venting is restricted, so clearing the vent is part of the repair rather than an extra.
- A range element that will not heat is usually the element or its terminal block, both inexpensive and quick. Say which element and whether it glows at all.
- Ask for parts cost and labour cost separately so you can weigh the repair against a budget machine's replacement price.
- No authorisation, no brand parts account, no factory tool. Choose on licensing, rating and how clearly the shop explains the fault.
- A long quoted lead time on a common component is worth questioning here — availability is normally not the constraint.
Components are inexpensive and stocked by every general parts retailer, so a pump, a lid switch or a thermal fuse is a same-week fix. The trap is labour: a $250 repair bill against a $450 machine is rarely worth authorising, so ask for the parts figure and the labour figure separately. Compare parts suppliers before you agree to an OEM-only quote.
What a Hotpoint repair is worth paying
Category prices lifted to the budget tier at 0.7×, the same multiplier the value estimator uses. The line is half the replacement price: above it, on a machine past two-thirds of its life, replacing usually wins. National figures, not New Mexico quotes.
| Category | Pros here | New at this tier | Repair-or-replace line |
|---|---|---|---|
| Refrigeratortypical repair $200–$400 · lasts 14 yrs | 1 | $840 | $420 |
| Washertypical repair $150–$350 · lasts 11 yrs | 1 | $560 | $280 |
| Dryertypical repair $100–$350 · lasts 12 yrs | 1 | $525 | $263 |
| Oven & Rangetypical repair $100–$500 · lasts 14 yrs | 1 | $700 | $350 |
Hotpoint repair by city in New Mexico
Counts are listed businesses servicing Hotpoint in that city.
Where these Hotpoint pros say they work
Every place the 1 listed business names in their own service areas. Claimed coverage, not a guarantee — confirm your address on the call.
Albuquerque · Corrales · Los Ranchos · North Valley · Rio Rancho · South Valley
Check these before you book
6 of the 67 guides covering categories Hotpoint builds. Faults that often resolve without a call-out — and a call-out to a budget-tier machine is the expensive kind.
Refrigerator Not CoolingModerate · 45–90 minutesFreezer Frost BuildupModerate · 45–90 minutes plus a 24-hour defrostWasher Won't DrainModerate · 45–90 minutesDryer Not HeatingModerate · 45–120 minutesDishwasher Not CleaningEasy · 30–60 minutesOven Not Heating EvenlyModerate · 45–90 minutes plus preheat time
Other brands serviced in New Mexico
Counts are New Mexico businesses naming that brand, out of the 9 listed statewide. Brands the corpus spells differently from ours appear without a link.
Hotpoint repair in other states
Every state with a listed Hotpoint pro, most first. New Mexico sits 6th of 7 on 1.
Hotpoint repair in New Mexico — common questions
How many Hotpoint repair pros are listed in New Mexico?
1 business listed in New Mexico names Hotpoint among the brands it services — 11% of the 9 businesses the directory holds for the state, and 6th of the 7 states with any, out of 9 such businesses nationwide. It works out of Albuquerque.
Do I need Hotpoint-authorised service in New Mexico, or will any repair company do?
Hotpoint sits in the budget tier, so any qualified New Mexico technician can take the job and you are choosing on rating, licensing and how clearly the fault is explained. The one listed here does not state a factory-authorised credential in its profile. While the appliance is inside its warranty period, check the manufacturer's terms before booking anyone — using an unauthorised technician can affect a claim.
Which Hotpoint appliances do New Mexico pros repair?
Hotpoint covers refrigeration, freezers, laundry, dishwashers and ranges — a plain, builder-grade household line. The one listed in New Mexico covers refrigerator, washer, dryer, oven & range. At the budget tier a comparable new refrigerator averages $840, which puts the repair-or-replace line near $420.
Are Hotpoint parts expensive in New Mexico, and where do they come from?
Components are inexpensive and stocked by every general parts retailer, so a pump, a lid switch or a thermal fuse is a same-week fix. The trap is labour: a $250 repair bill against a $450 machine is rarely worth authorising, so ask for the parts figure and the labour figure separately. For Hotpoint specifically, parts are usually sourced through general parts retailers. Parts prices do not vary much by state — labor does, because it tracks local wages and drive time — so the one business listed here is competing mainly on the labor half of the quote and on how quickly they can get the component. Whoever you use will need the full model and serial number from the data plate to order the right part.
How do New Mexico Hotpoint pros rate?
The single listed business carries a 4.7, against 4.6 across all 9 listed Hotpoint pros nationwide. The largest single review tally is 40 on Mr. Ed's Appliance Service and Sales in Albuquerque, out of 40 across the group. The one listed here states that it is licensed, and 1 shows a BBB accreditation — self-stated, so verify before booking.
Which Hotpoint pros are rated highest in New Mexico?
Mr. Ed's Appliance Service and Sales in Albuquerque at 4.7 on 40 reviews. For Hotpoint the rating is only half the question — ask what the technician has actually opened on this platform before.
Which other brands does this New Mexico business service?
It also names Amana (1), Frigidaire (1), GE (1), LG (1), Maytag (1), Roper (1). That matters when a single visit can cover two machines — a technician already at the door for a Hotpoint fault will usually look at another appliance for a fraction of a second call-out fee.
Is it worth repairing my Hotpoint appliance?
Value nameplates. The machine is cheap to buy, which is exactly why the repair-or-replace maths turns against you early. The site's value estimator prices budget-tier machines at 0.7× a category's typical new price and depreciates from there, which is the honest way to frame it: compare the quote against what the machine is worth today, not against what it cost new. On that basis a Hotpoint refrigerator carries a repair-or-replace line near $420 once it is past 9 years old, and a washer near $280 past 7 years. Ask for parts and labor as separate figures so you can see which is driving the total.
What should I have ready before calling about my Hotpoint appliance?
The model and serial number from the data plate — photograph it, do not transcribe it. Then the error code if the machine shows one, when the fault started, and whether anything changed just before it did. Describe the symptom rather than the appliance. On machines this simple, tumbles but no heat or fills but will not spin usually identifies the part before anyone arrives. The one listed in New Mexico does not advertise 24/7 callout, so call early in the day if it cannot wait.
Need Hotpoint repair in New Mexico?
Compare 1 listed business on rating, licensing and years in business — 1 state a license and 1 sit at 4.5 or better — then call directly.