Skip to content
ApplianceRepairListing

Brand · Luxury tier

Dacor appliance repair

Dacor builds professional-style ranges, rangetops, wall ovens, ventilation, built-in refrigeration, dishwashers, microwaves and wine storage — a kitchen-suite brand with no laundry line. 17 directory businesses in 14 states name Dacor among the brands serviced. Because Dacor sits in the luxury tier, brand-authorised service is the practical route rather than a formality — the parts run through the factory network, and a technician without an account can diagnose the fault and still be unable to buy the component.

Dacor pros
17
States
14
Appliance lines
7
Licensed
17
Average rating
4.8
Price tier
Luxury

Top-rated Dacor repair pros

All 17 listed businesses servicing Dacor, sorted by rating then review count.

Advertisement

What servicing a Dacor involves

Price tier and parts channel decide who can realistically do the work — read this before you compare quotes.

Two things drive the cost of a Dacor call and neither of them is the part. The first is that this is built-in equipment: a wall oven or a refrigeration column is fitted into cabinetry, and getting it out, working on it, and setting it back square is real labour that belongs on the quote as its own line. The second is gas. A professional-style range or rangetop has a gas train, and touching it is a separate qualification from appliance repair — a licensing question rather than a preference. Add a parts channel that runs through brand distributors and resolves components against the serial number, and the order of your questions matters: can you buy the part, are you qualified for this appliance, and only then what does it cost.

Price tier
Luxury · 2.2× typical new price
Parts usually come from
Brand distributors
Brand-authorised technician
The practical route
Appliance lines built
7

Who can do the work

Factory-authorised service is the practical route, not a formality. Authorised technicians get the service documentation, the diagnostic tooling and — decisively — the parts account. A generalist can often diagnose the fault and then be unable to buy the component.

Before you call about your Dacor

  • Ask whether removal from and refit into the cabinetry is inside the labour figure. On built-in equipment it is where quotes diverge most.
  • Never authorise gas-valve, manifold or regulator work from a technician who is not qualified for gas appliances, whatever else they are good at.
  • Order against the serial number as well as the model. Low-volume built-in lines carry running changes within a model year and the serial is what resolves them.
  • Cooking and refrigeration are two different trades under one badge. Say which appliance it is when you book, not just the brand.
  • Ask an independent whether they hold a parts account for the brand before you pay a diagnostic fee. A correct diagnosis they cannot act on is still a bill.
  • A wall oven that will not hold temperature is worth a door-seal, probe and calibration check before any conversation about the control board starts.

Dacor appliance lines, and who services them here

What the nameplate covers, against how many listed businesses actually repair that category.

Common faults on Dacor categories

64 step-by-step guides cover the categories Dacor builds, spread across 7 of them below. Work through one before you pay a diagnostic fee.

All guides →

Oven Not Heating Evenly

Oven & RangeModerate45–90 minutes plus preheat timeDIY $0–$80Pro $150–$400

If the elements test good, the sensor matches its chart, the door seals and the oven still cannot hold a steady temperature, the relays on the control board that switch the elements are the usual remaining suspect — and a board is worth having confirmed by measurement before you buy one, since they run $150–$400 and are rarely returnable once fitted. On a gas oven, uneven baking that comes from a partially blocked burner tube, an incorrect orifice, or a burner that lights unevenly along its length is licensed trade work; a yellow, lifting or lazy flame in particular should be looked at by a qualified technician rather than adjusted at home.

Range Hood Fan Weak or Not Venting

Range HoodEasy45–120 minutesDIY $0–$70Pro $150–$500

If the filters, damper, cap, blower wheel and duct are all clear and the fan still moves little air, the blower motor is failing — often audible as a motor running noticeably slower or hotter than it should. Motor replacement runs $60 to $180 for the part and is a moderate job on most hoods. Call a professional for ductwork that runs inside a wall or ceiling and cannot be inspected, for any hood that needs to be rerouted or newly ducted to the exterior, and to size and install makeup air. If the hood is hardwired and you are not confident working in the junction box with the circuit confirmed dead, that is an electrician's job.

Refrigerator Not Cooling

RefrigeratorModerate45–90 minutesDIY $0–$150Pro $150–$900

If the coils are clean, both fans run, the defrost circuit tests good and the compressor runs continuously without the evaporator ever getting cold, you are looking at the sealed system — a low refrigerant charge, a restriction in the capillary tube, or a compressor that has lost compression. Telltale signs are a suction line that never gets cold to the touch, frost on only the first few inches of the evaporator, or an oily residue around a weld joint. Opening that system legally requires EPA Section 608 certification and recovery equipment, so it is not a DIY repair. Expect $400–$900, and get that quote before committing on a unit over ten years old.

Freezer Frost Buildup

FreezerModerate45–90 minutes plus a 24-hour defrostDIY $15–$150Pro $150–$450

If the heater, thermostat and drain all check out and the coil still ices over, the control board is not commanding a defrost cycle, and that is a board diagnosis worth paying for rather than guessing at. Call a professional immediately, and do not run the unit, if you find an oily residue anywhere on the evaporator or the tubing — that indicates a refrigerant leak, and sealed-system repair legally requires EPA Section 608 certification. On a chest or upright freezer over ten years old, get the sealed-system quote before assuming repair is the right call.

Dishwasher Not Cleaning

DishwasherEasy30–60 minutesDIY $0–$70Pro $120–$400

If the filter, arms and inlet are all clear, the fill level and water temperature are correct, and the machine still leaves food on the dishes, the wash pump or its diverter valve is the likely fault — and on machines that route water between the upper and lower arms with a motorised diverter, a failed diverter starves one rack while the other cleans normally. Diagnosing that properly means running the service test cycle, which is worth paying for rather than replacing pumps on a guess. Grinding from the pump, or a burnt smell during the wash phase, means stop using the machine and get it looked at.

Microwave Runs But Doesn't Heat

MicrowaveAdvanced15–30 minutes for safe checksDIY $0Pro $150–$400

Call a technician for anything past the door latch. Magnetrons, high-voltage capacitors, diodes and transformers are all professional work, not because the parts are complicated but because the stored charge in that capacitor is genuinely dangerous. A technician will also verify the door seals and check for microwave leakage after any repair, which matters and which you cannot do without a survey meter. If your microwave is over-the-range or built in, get a quote — those are worth repairing. If it is a countertop unit, price a replacement first.

Wine Cooler Not Cooling

Wine CoolerModerate30–75 minutesDIY $0–$120Pro $150–$600

On a compressor wine cooler, if the coils are clean, the fans run, the seal is good and the compressor runs continuously without cooling, the fault is in the sealed system — and that work requires EPA Section 608 certification. Get the quote before authorising it: sealed-system repair often runs $300 to $600 against a replacement cooler at $200 to $800 for typical undercounter sizes, so the maths frequently favours replacement. Control board faults on either type should be confirmed by measurement rather than bought on a guess.

Oven Not Heating At All

Oven & RangeModerate30–75 minutesDIY $15–$110Pro $180–$450

On a gas oven, the safety valve is the part downstream of the igniter, and replacing it means opening the gas circuit. That is licensed work in most jurisdictions and should not be attempted as a DIY repair — call a qualified technician or your gas utility. On any oven, a failed control board or relay board is a $150–$400 part that should be confirmed by measurement rather than bought on a guess. And if any part of the wiring, terminal block or range cord shows scorching, that is an electrician's job before it is an appliance job.

56 more guides cover the categories Dacor builds. Browse the full library.

Dacor parts: cost and where to buy

Parts move through brand distributors rather than general retailers, carry the highest prices in the trade, and usually need the full model and serial number to order, because running changes within a model are common. Budget for a parts wait.

All parts suppliers →

For Dacor, parts are usually sourced through brand distributors. Ask an independent technician whether they hold a parts account for this brand before you pay for a diagnostic — at this tier that single question decides whether the repair can be completed at all.

Commonly replaced parts for the Dacor categories the parts library covers, with typical prices and DIY difficulty.
PartApplianceTypical priceDIY difficulty
Water FilterRefrigerator$25–$60Easy
Door GasketRefrigerator$30–$80Easy
Condenser Fan MotorRefrigerator$50–$150Moderate
Spray ArmDishwasher$15–$40Easy
Inlet ValveDishwasher$15–$40Moderate
Bake ElementOven & Range$15–$40Easy
Oven Temperature SensorOven & Range$15–$30Easy
Turntable MotorMicrowave$15–$30Easy
Evaporator Fan MotorRefrigerator$40–$120Moderate
Start Relay and OverloadRefrigerator$12–$45Easy
Water Inlet ValveRefrigerator$30–$95Moderate
Defrost ThermostatRefrigerator$15–$50Moderate
Defrost HeaterRefrigerator$30–$95Advanced
ThermistorRefrigerator$10–$35Moderate
Ice Maker AssemblyRefrigerator$80–$260Moderate
Main Control BoardRefrigerator$90–$340Moderate
Drain PumpDishwasher$35–$120Moderate
Door Latch and Switch AssemblyDishwasher$20–$80Easy
Heating ElementDishwasher$25–$85Moderate
Float SwitchDishwasher$10–$35Easy
Door GasketDishwasher$20–$75Easy
Rack Roller and Adjuster KitDishwasher$12–$50Easy
Detergent DispenserDishwasher$30–$100Moderate
Circulation Pump and MotorDishwasher$90–$330Advanced
Broil ElementOven & Range$20–$75Easy
Oven IgniterOven & Range$25–$90Moderate
Surface Burner IgniterOven & Range$20–$95Moderate
Radiant Surface ElementOven & Range$25–$100Moderate
Infinite SwitchOven & Range$20–$70Moderate
Oven Door GasketOven & Range$20–$80Easy
Oven Door HingesOven & Range$30–$120Moderate
Electronic Control BoardOven & Range$90–$380Moderate
Door Interlock Switch SetMicrowave$10–$40Moderate
Turntable Coupler and Roller RingMicrowave$8–$30Easy
Grease and Charcoal FiltersMicrowave$12–$45Easy
Cavity Lamp and SocketMicrowave$5–$25Easy
Vent Fan MotorMicrowave$40–$140Moderate
Control Board or TouchpadMicrowave$50–$220Moderate
MagnetronMicrowave$55–$190Advanced
High-Voltage Diode and CapacitorMicrowave$10–$60Advanced
Start Relay and OverloadFreezer$12–$45Easy
Door GasketFreezer$40–$140Easy
Temperature Control ThermostatFreezer$25–$90Moderate
Defrost ThermostatFreezer$15–$50Moderate
Defrost TimerFreezer$25–$80Moderate
Evaporator Fan MotorFreezer$40–$130Moderate
Defrost HeaterFreezer$30–$100Advanced
Lid Hinge and LockFreezer$12–$60Easy
Cooling FanWine Cooler$20–$70Easy
Thermoelectric ModuleWine Cooler$30–$100Moderate
Door GasketWine Cooler$30–$110Easy
Temperature Control BoardWine Cooler$50–$200Moderate
Compressor Start RelayWine Cooler$15–$55Easy
Door Hinge SetWine Cooler$20–$80Moderate
Interior LED StripWine Cooler$15–$50Easy
Shelf or RackWine Cooler$25–$90Easy
Grease FilterRange Hood$15–$65Easy
Charcoal FilterRange Hood$15–$55Easy
Blower WheelRange Hood$20–$80Moderate
Blower MotorRange Hood$60–$260Moderate
Speed SwitchRange Hood$12–$90Easy
Light Socket and LampRange Hood$8–$40Easy
Damper FlapRange Hood$10–$40Easy

Prices are typical ranges for the category, not Dacor quotes. Expect OEM components on this tier to sit at or above the top of each range.

Dacor repair by state

Every state with a listed Dacor business. Each opens the full list for that state with ratings, licensing and phone numbers.

Dacor repair — common questions

Do I need a technician authorised by Dacor, or will any repair company do?
Dacor sits in the luxury tier, where authorised service is the practical route rather than a formality. Factory-authorised service is the practical route, not a formality. Authorised technicians get the service documentation, the diagnostic tooling and — decisively — the parts account. A generalist can often diagnose the fault and then be unable to buy the component. If you would rather use an independent, ask one question before you pay a diagnostic fee: can you obtain Dacor parts? A technician who cannot buy the component cannot finish the job however good the diagnosis is.
Are Dacor parts expensive, and where do they come from?
Parts move through brand distributors rather than general retailers, carry the highest prices in the trade, and usually need the full model and serial number to order, because running changes within a model are common. Budget for a parts wait. For Dacor specifically, parts are usually sourced through: Brand distributors. Whoever you use will need the full model and serial number from the data plate to order the right component.
The quote has a line for removal and refit. Is that legitimate?
On built-in equipment, yes — and a quote without it is the one to question. A refrigeration column or a wall oven is fixed to the cabinetry with trim, brackets and sometimes a custom panel; pulling it, working on it, and reseating it square and level is an hour or more before anything is diagnosed. What you should ask is how much of that the quote includes, and whether it is charged again on the second visit when a part arrives.
The oven works but a surface burner will not light. Is that a gas job?
It depends where the fault sits, which is exactly why the qualification question comes first. An igniter or a spark module is appliance work. A gas valve, a manifold or a regulator is gas work and needs someone licensed for it. Describe the symptom precisely when you book — does it click without lighting, light and then go out, or do nothing at all — and ask what gas qualification the attending technician holds before the visit is scheduled.
How long should I expect to wait for a Dacor part?
Longer than for a mainstream brand, because components move through brand distributors rather than general retailers and are often resolved by serial number rather than model alone. Nobody can give you a real figure until they have both numbers, so hand them over early. Ask for the expected wait alongside the price — on built-in equipment the wait is usually the part of the job that actually affects your household.
How do I find Dacor repair near me?
This page lists 17 listed businesses across 14 states whose profile names Dacor among the brands they service, ranked by rating and then review count. Every listing carries a direct phone number — there is no lead form and no referral fee. Compare two or three on rating, licensing and years in business, then call the one that explains the fault most clearly.
Which Dacor appliances can be repaired?
Dacor builds professional-style ranges, rangetops, wall ovens, ventilation, built-in refrigeration, dishwashers, microwaves and wine storage — a kitchen-suite brand with no laundry line. Listed Dacor pros currently cover refrigerator, washer, dryer, dishwasher, oven & range, wine cooler and more. As a rule of thumb, repair is the better value when the quote comes in under half the replacement price and the machine still has a meaningful share of its expected life left.
What should I have ready before I call about my Dacor appliance?
The model and serial number from the data plate — photograph it, do not transcribe it. Then the error code if the machine shows one, when the fault started, and whether anything changed just before it did. Ask whether removal from and refit into the cabinetry is inside the labour figure. On built-in equipment it is where quotes diverge most. That is usually enough for a technician to quote accurately over the phone instead of quoting a range.
Is it worth repairing my Dacor appliance, or should I replace it?
Built-in and professional-grade equipment. Finding the right technician matters more here than anywhere else in the directory. The site's value estimator prices luxury machines at 2.2× a category's typical new price, then depreciates from there, which is the honest way to frame the decision: compare the quoted repair against what the machine is worth today, not against what it cost new. Ask for parts and labour as separate figures so you can see which one is driving the total.

Need Dacor repair?

Every business on ApplianceRepairListing is listed free and answers its own phone. Compare two or three, confirm licensing, check they can obtain Dacor parts, and book the one that explains the fault clearly.