Skip to content
ApplianceRepairListing

Parts reference

Ice Maker parts

Standalone and undercounter ice makers fail on water and airflow long before they fail on refrigeration. A clogged filter, a scaled water line or a condenser packed with dust explains most no-ice calls, and all three cost under $70 to put right.

Parts priced
8
Price band
$20–$280
Suppliers stocking
5
Repair guides
8

Find your ice maker model number first

No supplier can sell you the right part without it, and the name printed on the front of the appliance is not it.

  1. Inside the storage bin

    Empty the bin and look at the side or rear wall of the liner. This is the usual spot on undercounter and countertop machines.

  2. Behind the front kick plate or grille

    The lower grille on an undercounter unit unclips or unscrews. The tag is on the frame behind it, near the condenser.

  3. On the back panel

    On built-in units that have to come out to be serviced anyway, the tag is on the rear sheet metal near the water inlet.

What the tag looks like

8 to 14 characters. Note whether the machine is air-cooled or water-cooled and whether it drains by gravity or by pump — those three facts determine which service parts fit, and they are not always obvious from the model number alone.

What fails on a ice maker

Ordered most-replaced first. Prices are typical retail ranges for the part alone — not quotes, and not including labour. Confirm the part against your model number before you order.

Ice Maker replacement parts with symptom, install difficulty, typical retail price and expected lifespan
PartWhat you noticeInstallTypical priceLifespan
Water filterCheck first: A consumable. If nobody can remember changing it, change it before diagnosing anything else — it is the cause more often than every mechanical part combined.Thin, hollow or cloudy cubes, and production that has quietly halved.easy5–10 minutes$25$70Either works6–12 months
Water inlet valveCheck first: Confirm supply pressure at the tap first. A valve that will not close leads to a frozen fill tube, which is the usual cause of an ice maker that jams solid overnight.Machine cycles but no water enters the mould, or it overfills and freezes solid.moderate45–90 minutes$30$100Either works6–12 years
Ice maker module or assemblyCheck first: Most modules are sold complete because the internal switches and the timing cam are not separately serviceable. Confirm the mould reaches freezing before you replace it — a refrigeration fault presents the same way.Ice never ejects, or the maker fills and refills without harvesting.moderate1–2 hours$90$280Buy OEM5–10 years
Condenser fan motorCheck first: Clean the condenser fins first with a soft brush — an undercounter machine in a kitchen pulls in a remarkable amount of dust, and a blocked condenser produces exactly the same symptoms as a dead fan.Machine runs constantly, cabinet is hot, and production drops off in warm weather.moderate1–2 hours$50$160Either works8–14 years
Mould or evaporator thermostatCheck first: It closes at a set temperature to trigger harvest. Test continuity at freezing. Getting a reliable reading usually means letting the machine reach steady state first, so allow an hour.Harvest cycle starts too early or never starts at all.moderate1–2 hours$20$70Either works8–14 years
Water pump (recirculating models)Check first: Descale the water circuit before replacing the pump. Scale is what kills these, and a full descale sometimes brings a struggling pump back for another season.Cubes form only on part of the grid, or the machine runs its cycle with no water noise.moderate1–2 hours$40$150Either works6–12 years
Cutter grid (nugget and cube machines)Check first: A broken cutter wire is visible once the panel is off. This is live low-voltage work across a wet component — worth handing over unless you are confident.Ice comes out as a solid slab, or the machine trips its breaker during harvest.advanced2–3 hours$70$240Buy OEM5–10 years
Drain pumpCheck first: Only fitted where the drain runs uphill. Check the check-valve and the line for slime buildup first — these lines need sanitising twice a year and rarely get it.Bin water backs up, or the machine shuts down on a drain fault.moderate1–2 hours$60$210Buy OEM6–12 years

Easy · 1

Screwdriver, maybe a nut driver

Moderate · 6

Nut drivers, multimeter, a helper for heavy panels

Advanced · 1

Full socket set, multimeter, and somewhere to lay the machine down

1 of these 8 parts need nothing more than a screwdriver. Before you accept a repair quote on a ice maker, it is worth knowing which tier the part sits in — the labour is usually the larger half of the bill.

Advertisement

OEM or aftermarket for a ice maker

Paying OEM for everything is waste. Saving on the wrong part costs you the repair twice.

Water filters, inlet valves and fan motors are safely aftermarket. Ice maker modules, cutter grids and evaporator assemblies should be OEM — they are matched to the harvest cycle timing of that specific machine, and a near-equivalent produces ice that never releases cleanly.

Buy OEM on this appliance
Ice maker module or assembly, Cutter grid, Drain pump
Either works — buy on price
Water filter, Water inlet valve, Condenser fan motor, Mould or evaporator thermostat, Water pump
Still under warranty?
Call the manufacturer before you buy anything. A covered repair costs nothing, and fitting a part yourself first can complicate the claim.
The full OEM-versus-aftermarket rules →

Where to buy ice maker parts

Shipping and returns are the terms each supplier publishes; where none is stated, we say so rather than guess. We are not affiliated with any of them and earn nothing from these listings.

Suppliers stocking Ice Maker parts, with phone numbers, shipping and returns terms
SupplierShippingReturnsPart finder
PartSelectpartselect.com1-888-738-4871Best for: Knowing the model number and wanting the install video with it.Free over $49365 daysModel number search
RepairClinicrepairclinic.com1-800-269-2609Best for: Not knowing which part failed yet.Not listed365 daysSymptom-based finder
Appliance Parts Prosappliancepartspros.com1-877-477-7278Best for: Wanting a technician on the phone before you order.Same-day dispatchNot listedParts diagrams by model
Sears Parts Directsearspartsdirect.com1-800-252-1698Best for: Kenmore and Craftsman, and older models others have dropped.Not listedNot listedModel lookup with exploded diagrams
Amazon Appliance Partsamazon.com1-888-280-4331Best for: Needing it tomorrow and cross-checking OEM against aftermarket.Prime next-dayEasy returns, no window statedKeyword search and reviews

Guides that use these parts

Tools, safety warnings and the steps in order, before you spend anything.

Next steps

Not sure the ice maker is worth the part?

Check what it is still worth before you spend. The Appliance Blue Book takes its age, brand tier and condition and tells you whether a repair still makes sense — or points you at someone local who can quote the job properly.

Part prices are our own editorial estimates of typical retail ranges for the part alone. They are not quotes, they exclude labour, and they vary by brand, model year and stock. Shipping and returns terms are those each supplier publishes and can change without notice. Always verify part compatibility with your specific model number before purchasing, and disconnect power before any inspection.