Skip to content
ApplianceRepairListing

GE · New Hampshire · Mid-rangetier · 45th of 50 states

GE repair in New Hampshire

8 of the 9 businesses listed in New Hampshire — 89% — name GE among the brands serviced, across 3 cities with an index page. That is 45th of the 50 states with any, out of 655 nationwide. Ranked by rating, then review count.

GE sits in the mid-range tier, so any qualified New Hampshire technician can take the job. Have the model and serial number from the data plate ready — it is what decides whether the part is already on the van.

GE pros
8
State rank
45th
Cities
3
Average rating
4.6
Licensed
8
24/7 emergency
0
Reviews
1,198

GE repair pros in New Hampshire

Sorted by rating, then review count. Call the number on the listing — no forms, no lead fees.

All GEpros →

Accu-Tek

24 yrs in business

Pelham, NH

4.535 reviewsRated 4.5 out of 5 from 35 reviews

Refrigerator Repair · Washer Repair · Dryer Repair +3 more

LicensedInsured
Advertisement

What the listings say about GE repair in New Hampshire

Counted from the 8 profiles above, not from a survey. Everything a business states about itself is reported as a claim.

New Hampshire holds 8 listed GE businesses, out of 655 nationwide. That ranks 45th of the 50 states with any, level with Maine and behind Florida on 27. They are 8 of the 9 businesses listed in New Hampshire — 89% of the state directory.

Their ratings average 4.6, level with the 4.6 average across all 655 listed nationwide, and 8 of the 8 sit at 4.5 or better. None holds a straight 5.0, and none sits below 4.0. Between them they carry 1,198 reviews, the largest single tally being 711 on Mr. Appliance of Manchester, Concord & Laconia in Manchester. Rating and review volume are what the businesses' own public profiles report — treat a high average on six reviews differently from the same average on six hundred.

By review volume the group is led by Mr. Appliance of Manchester, Concord & Laconia in Manchester (711 reviews, 4.8), Anything Appliance in Hooksett (145 reviews, 4.6) and G&G Appliance Service Inc in Salem (112 reviews, 4.5). By rating it is Mr. Appliance of Manchester, Concord & Laconia at 4.8 on 711 reviews, Derry Appliance Repair LLC at 4.8 on 50 reviews and Anything Appliance at 4.6 on 145 reviews. Those are two different questions and they rarely give the same answer — volume tells you a company has been doing this at scale, a high average on a handful of reviews tells you much less.

All 8 state that they are licensed, and all state that they carry insurance. On top of that, 6 show a Better Business Bureau accreditation and 2 publish a parts-and-labor warranty term in the profiles. None advertises round-the-clock emergency cover, so call early in the day and ask directly. All of that is self-stated in the listing, not verified here: ask for the license number and a current certificate of insurance, and for anything that opens a sealed refrigerant system ask to see federal EPA Section 608 certification, which is required in all fifty states.

6 of the 8 publish a founding year: the longest-established has been trading since 2002, and the median across those that say is 18 years. Manchester holds the most at 4 — 50% of the group — followed by Nashua on 3, across 3 New Hampshire cities with an index page. Between them they name 23 distinct towns, suburbs and neighborhoods in their stated service areas, so coverage reaches well past the cities listed here — give your address when you call rather than assuming.

GE repair in New Hampshire — figures counted from the listed businesses.
MeasureNew Hampshire
Listed prosof 655 nationwide for GE8
Rank among statesFlorida leads on 2745th of 50
Share of the New Hampshire directory8 of 9 listed businesses89%
Average rating4.6 nationwide · 8 rated 4.5+4.6
Reviews on filemost on one profile: 7111,198
State licensing claimed8 also state insurance8 of 8
Accreditation statedself-stated in the listing, verify before booking6 BBB
24/7 emergencyask when you call0 of 8
Longest trading sincemedian 18 years across 6 that publish one2002
Cities with an index pageManchester leads on 43
Towns named in service areasclaimed coverage, not a guarantee — confirm your address23

Booking GE service in New Hampshire

The brand decides the parts route and the labour skill; the state decides the labour rate and the drive time. Both matter, and only one of them is on the quote.

If any brand can be described as easy to get repaired, this is it. GE components are catalogued, widely distributed and familiar to nearly every independent shop, which is why most technicians will quote the job without hesitation and why a common failure is often fixed on the first visit. The complication is breadth. One badge covers a builder-grade range and a built-in refrigeration column, and the built-in lines are serviced like luxury equipment — cabinetry removal, longer parts routes, a narrower set of shops that have worked on them — even though the badge itself sits in the mid tier. The model number is what tells a technician which of those two conversations you are having.

Price tier
Mid-range · 1× typical new price
Parts usually come from
General parts retailers
Brand-authorised technician
Not usually required
Stated a factory credential here
0 of 8
Names GE in a certification
0 of 8
Licensed in New Hampshire
8 of 8
  • Say which line you have when you book. Built-in and professional GE equipment is a different job from the mainstream line despite the shared badge.
  • Sealed-system refrigeration work requires an EPA 608 certified technician. Ice makers, dispensers and water valves are module work and do not.
  • A garbage disposal is usually a replace-not-repair appliance, and a jam plus a reset is homeowner territory worth trying before anyone is booked.
  • Aftermarket equivalents exist for many components. Ask which the quote assumes and what warranty comes with it.
  • A long quoted lead time on an ordinary component is worth a second opinion — wide availability is this brand's advantage.
  • The rating plate is inside the fresh-food compartment on refrigeration, behind the lower drawer or on the door frame on ranges, and inside the door on dishwashers.

The best-stocked parts situation in the trade. OEM components are easy to source, aftermarket equivalents exist for most of them, and a technician will often have the common failure on the van rather than ordering it. Compare parts suppliers before you agree to an OEM-only quote.

What a GE repair is worth paying

Category prices lifted to the mid-range tier at 1×, the same multiplier the value estimator uses. The line is half the replacement price: above it, on a machine past two-thirds of its life, replacing usually wins. National figures, not New Hampshire quotes.

GE categories covered in New Hampshire, with tier-adjusted replacement prices.
CategoryPros hereNew at this tierRepair-or-replace line
Refrigeratortypical repair $200–$400 · lasts 14 yrs8$1,200$600
Washertypical repair $150–$350 · lasts 11 yrs8$800$400
Dryertypical repair $100–$350 · lasts 12 yrs8$750$375
Dishwashertypical repair $150–$300 · lasts 10 yrs8$700$350
Oven & Rangetypical repair $100–$500 · lasts 14 yrs8$1,000$500
Microwavetypical repair $50–$200 · lasts 9 yrs4$250$125
Garbage Disposaltypical repair $85–$250 · lasts 10 yrs2$200$100
Ice Makertypical repair $150–$400 · lasts 8 yrs3$400$200
Freezertypical repair $150–$400 · lasts 15 yrs5$600$300

The same 8 businesses also cover trash compactor (1), wine cooler (1), which GE does not build. That is useful rather than irrelevant: one visit can cover two machines, and a second job on the same call-out costs far less than a second call-out. 1 of them also list dryer vent cleaning.

Price my GE appliance

GE repair by city in New Hampshire

Counts are listed businesses servicing GE in that city. Manchester holds 50% of the state's total.

Where these GE pros say they work

Every place the 8 listed businesses name in their own service areas. Claimed coverage, not a guarantee — confirm your address on the call.

Nashua · Manchester · Bedford · Concord · Hudson · Londonderry · Merrimack · Amherst · Derry · Milford · Salem · Windham · Barrington · Dover · Durham · Hollis · Hooksett · Laconia · Mont Vernon · Pelham · Rochester · Somersworth · Wilton

Check these before you book

6 of the 98 guides covering categories GE builds. Faults that often resolve without a call-out — and a call-out to a mid-range-tier machine is the expensive kind.

All guides →

Other brands serviced in New Hampshire

Counts are New Hampshire businesses naming that brand, out of the 9 listed statewide. Brands the corpus spells differently from ours appear without a link.

GE repair in other states

Every state with a listed GE pro, most first. New Hampshire sits 45th of 50 on 8.

GE repair in New Hampshire — common questions

How many GE repair pros are listed in New Hampshire?
8 businesses listed in New Hampshire name GE among the brands they service — 89% of the 9 businesses the directory holds for the state, and 45th of the 50 states with any, out of 655 such businesses nationwide. Manchester holds the most at 4.
Do I need GE-authorised service in New Hampshire, or will any repair company do?
GE sits in the mid-range tier, so any qualified New Hampshire technician can take the job and you are choosing on rating, licensing and how clearly the fault is explained. None of the 8 listed here states a factory-authorised credential in its profile. While the appliance is inside its warranty period, check the manufacturer's terms before booking anyone — using an unauthorised technician can affect a claim.
Which GE appliances do New Hampshire pros repair?
GE builds across every major category in this directory — refrigeration, freezers, laundry, dishwashers, cooking, microwaves, ventilation, ice makers and garbage disposals — from builder-grade units up to built-in and professional-style lines. The 8 listed in New Hampshire between them cover refrigerator, washer, dryer, dishwasher, oven & range, microwave, garbage disposal and 2 more categories. At the mid-range tier a comparable new refrigerator averages $1,200, which puts the repair-or-replace line near $600.
Are GE parts expensive in New Hampshire, and where do they come from?
The best-stocked parts situation in the trade. OEM components are easy to source, aftermarket equivalents exist for most of them, and a technician will often have the common failure on the van rather than ordering it. For GE specifically, parts are usually sourced through general parts retailers. Parts prices do not vary much by state — labor does, because it tracks local wages and drive time — so the 8 businesses listed here are competing mainly on the labor half of the quote and on how quickly they can get the component. Whoever you use will need the full model and serial number from the data plate to order the right part.
How do New Hampshire GE pros rate?
Their ratings average 4.6, against 4.6 across all 655 listed GE pros nationwide, and 8 of the 8 sit at 4.5 or better. The largest single review tally is 711 on Mr. Appliance of Manchester, Concord & Laconia in Manchester, out of 1,198 across the group. All 8 state that they are licensed, and 6 show a BBB accreditation — self-stated, so verify before booking.
Which GE pros are rated highest in New Hampshire?
Mr. Appliance of Manchester, Concord & Laconia in Manchester at 4.8 on 711 reviews, Derry Appliance Repair LLC in Derry at 4.8 on 50 reviews, Anything Appliance in Hooksett at 4.6 on 145 reviews. For GE the rating is only half the question — ask what the technician has actually opened on this platform before.
Which other brands do these New Hampshire businesses service?
The same 8 businesses also name Frigidaire (8), LG (8), Maytag (8), Samsung (8), Whirlpool (8), KitchenAid (7). That matters when a single visit can cover two machines — a technician already at the door for a GE fault will usually look at another appliance for a fraction of a second call-out fee.
Is it worth repairing my GE appliance?
The volume tier. These are the machines most technicians see most days, which is the single biggest advantage they have. The site's value estimator prices mid-range-tier machines at 1× a category's typical new price and depreciates from there, which is the honest way to frame it: compare the quote against what the machine is worth today, not against what it cost new. On that basis a GE refrigerator carries a repair-or-replace line near $600 once it is past 9 years old, and a washer near $400 past 7 years. Ask for parts and labor as separate figures so you can see which is driving the total.
What should I have ready before calling about my GE appliance?
The model and serial number from the data plate — photograph it, do not transcribe it. Then the error code if the machine shows one, when the fault started, and whether anything changed just before it did. Say which line you have when you book. Built-in and professional GE equipment is a different job from the mainstream line despite the shared badge. None of the 8 listed in New Hampshire advertises 24/7 callout, so call early in the day if it cannot wait.

Need GE repair in New Hampshire?

Compare 8 listed businesses on rating, licensing and years in business — 8 state a license and 8 sit at 4.5 or better — then call directly.