Skip to content
ApplianceRepairListing

Connecticut · 5th of 16 states

Range Hood repair in Connecticut

1 listed range hood repair business across 1 city in Connecticut, ranked by customer rating — 6% of everything this directory holds for the state, and 5th of the 16 states with any. Compare licensing and review counts, then call directly. Free, and no commission.

Hood work sits between appliance repair and light construction, so ask whether the pro also handles duct and damper work — that is where most extraction problems actually live.

Listed pros
1
State rank
5th
Cities
1
Average rating
4.9
Licensed
1
Median years trading
20
Reviews
189

Range Hood repair pros in Connecticut

Sorted by rating, then review count. Every phone number is a direct line to the business.

All Connecticut pros
Advertisement

Only 1 range hood specialist listed in Connecticut

That is 5th of the 16 states with any, against 6 in California. Range hood work is a narrower speciality than the everyday kitchen and laundry calls, so coverage is thin in most states. 15 other appliance businesses are listed in Connecticut, and general technicians will often take this work once they know the model. Have the model number ready when you call.

What the listings say about range hood repair in Connecticut

Counted from the 1 profile above, not from a survey. Everything a business states about itself is reported as a claim.

Connecticut holds a single listed range hood repair business, out of 24 nationwide. That ranks 5th of the 16 states with any, level with Colorado and behind California on 6. It is 1 of the 16 businesses listed in Connecticut — 6% of the state directory.

It carries a 4.9 rating, against 4.7 across all 24 listed nationwide. It carries 189 reviews. Rating and review volume are what the businesses' own public profiles report — treat a high average on six reviews differently from the same average on six hundred.

The listed business states that it is licensed and states that it carries insurance. Its profile also states a factory-authorised or factory-trained credential. It does not advertise round-the-clock cover, so call early in the day and ask directly. All of that is self-stated in the listing, not verified here: ask for the license number and a current certificate of insurance, and for anything that opens a sealed refrigerant system ask to see federal EPA Section 608 certification, which is required in all fifty states.

It has been trading since 2006 — 20 years. It works out of Stamford. It names 6 distinct towns, suburbs and neighborhoods in its stated service area, so its reach is wider than the town it sits in — give your address when you call.

Range Hood repair in Connecticut — figures counted from the listed businesses.
MeasureConnecticut
Listed prosof 24 nationwide for range hood repair1
Rank among statesCalifornia leads on 65th of 16
Share of the Connecticut directory1 of 16 listed businesses6%
Average rating4.7 nationwide · 1 rated 4.5+4.9
Reviews on filemost on one profile: 189189
State licensing claimed1 also states insurance1 of 1
Accreditation statedself-stated in the listing, verify before booking1 factory
24/7 emergencyask when you call0 of 1
Longest trading sincemedian 20 years across 1 that publishes one2006
Cities with an index pageStamford leads on 11
Towns named in service areasclaimed coverage, not a guarantee — confirm your address6

Not counted above

2 more Connecticut appliance repair businesses, service list unknown

These are real Connecticut companies whose records carry contact details but no list of what they repair. None of them states range hood repair, so none is counted in the 1 above, and none is listed here as servicing one. Asking takes one phone call, which beats starting the search again.

Details for these businesses come from OpenStreetMap under the Open Database License © OpenStreetMap contributors. We hold no rating, licence or insurance details for themeither — confirm before hiring.

Range Hood repair by city in Connecticut

Counts are range hood repair businesses based in that city.

Where Connecticut range hood pros say they work

Every place the 1 listed business name in their own service areas. Claimed coverage, not a guarantee — confirm your address on the call.

Darien · Greenwich · New Canaan · Norwalk · Stamford · Westport

What Connecticut technicians find most often

The 5 most common range hood faults, and whether each is homeowner work or a job for a licensed technician.

All 8 faults
  • Fan runs but barely extracts

    Homeowner fix

    Grease-saturated mesh filters, a crushed or over-long duct run, or an exterior damper that is stuck partly closed.

    Step-by-step: Range Hood Fan Weak or Not Venting
  • Fan will not run at any speed

    Technician

    The blower motor, the speed control switch, or the run capacitor. Capacitors fail more often than motors do.

    Step-by-step: Range Hood Fan Weak or Not Venting
  • Only some speeds work

    Technician

    The speed control switch or the control board. A motor that runs at all is rarely the fault.

  • Light does not work with a known-good bulb

    Technician

    The lamp socket or the control board. On LED hoods the entire light module is usually the part.

    Step-by-step: Range Hood Light Not Working
  • Rattling or droning at high speed

    Homeowner fix

    An unbalanced blower wheel, grease build-up on the fan blades, or loose duct sections vibrating against a joist.

Try these before you book a Connecticut technician

7 published range hood guides. A diagnostic fee is $50–$100 before any work starts, so half an hour with a flashlight is worth spending.

All guides →

Keep the next call from happening

Ask the technician to walk you through these while they are on site — every one of them prevents a fault in the list above.

  • Degrease the mesh filters in hot water or the dishwasher

    Monthly

    Prevents: The weak extraction that gets misdiagnosed as a failed motor — and a real fire risk.

  • Replace charcoal filters on recirculating hoods

    Every 6–12 months

    Prevents: Odours that linger with the hood running at full speed.

  • Wipe grease off the blower wheel

    Annually

    Prevents: The imbalance that causes rattling and kills motor bearings.

Other appliances in Connecticut

Counts are Connecticut businesses servicing that appliance, out of the 16 listed statewide. A dash opens the nationwide page instead.

Range Hood repair in other states

Every state with a listed range hood specialist, most first. Connecticut sits 5th of 16 on 1.

What range hood repair costs in Connecticut

National ranges for parts and labor together, before the $50–$100 diagnostic. Labor tracks local wages and drive time, so metro Connecticut sits toward the top of each range and rural calls toward the bottom, while the part costs about the same anywhere. Nothing here is a quote.

Full cost breakdown →
Typical range hood repair jobs with national cost ranges.
RepairParts + labor
Filter clean or replacement and airflow checkResolves most weak-extraction complaints outright.$80–$150
Charcoal filter set (recirculating)A consumable — every 6 to 12 months.$60–$140
Speed control switchThe usual cause when only some speeds work.$120–$250
Blower motor run capacitorTest this before condemning the motor.$130–$260
Light socket or LED moduleIntegrated LED panels are replaced whole.$120–$280
Blower motor replacementThe most expensive genuine hood part.$250–$450

10–15 years. Hoods have one moving part, so what actually ends their life is grease, corrosion, and kitchen remodels rather than mechanical failure. When replacing beats repairing covers the 4 cases where the maths turns, in full.

Blue Book

The 50% rule for a range hood

New unit, US average
$350
Expected lifespan
14 years
Repair-or-replace line
$175

A quote above $175 on a range hood past 9 years old is usually better spent on a replacement.

Estimate my range hood’s valuePrice the part first

Range Hood repair in Connecticut — common questions

How many range hood repair pros are listed in Connecticut?
1 business listed in Connecticut names range hood repair among the work it does — 6% of the 16 businesses this directory holds for the state, 5th of the 16 states with any, out of 24 listed nationwide — 4% of them. It works out of Stamford. The directory is a sample of the market, not a register of every company trading in Connecticut.
Which range hood repair companies are rated highest in Connecticut?
Gold Coast Appliance Repair in Stamford at 4.9 on 189 reviews. Ratings and review counts come from the businesses' own public profiles and are not verified here.
How much does range hood repair cost in Connecticut?
Expect $150–$400 for a common range hood repair, parts and labor together, on top of a $50–$100 diagnostic fee that most companies credit against the work if you go ahead. Those are national bands, not Connecticut quotes: labor rates track local wages and drive time, so a dense metro sits at the top of each range and a rural call at the bottom, while the part itself costs about the same anywhere. Because only 1 range hood business is listed in Connecticut, get one written estimate here and a second from a general appliance technician nearby.
Which Connecticut city has the most range hood repair companies?
Stamford. It is the only Connecticut city with an index page that currently holds a range hood specialist.
Are range hood repair technicians licensed in Connecticut?
The single range hood business listed here states that it is licensed, and states that it carries insurance. Licensing for appliance repair is set state by state and sometimes by city or county, so the reliable check is the paperwork: ask which license the company works under, get the number, and confirm it with the issuing authority. Two requirements are national rather than local — sealed refrigerant work needs federal EPA Section 608 certification, and gas work needs a technician qualified for gas appliances.
Can I get same-day or emergency range hood repair in Connecticut?
The one listed here does not advertise round-the-clock emergency cover. Same-day appointments for common faults are still routine in the trade. Call early in the day and ask directly — a technician who already has the part on the van can often fit you in.
Which range hood brands do Connecticut repair pros service?
The range hood pros listed in Connecticut name 10 distinct brands between them. The most widely covered are Bosch (1), Dacor (1), GE Monogram (1), LG (1), Miele (1), Samsung (1). Chimney and island hoods from Bosch, Thermador, Miele, Viking and Wolf use proprietary blower and LED modules and often need brand-specific parts. Insert and liner units built into custom cabinetry are also size-specific, which is why repair usually beats replacement on them.
How long have Connecticut range hood repair companies been in business?
It has been trading since 2006 — 20 years. Use it as one signal among several: what matters more is whether the technician has opened your platform before, and whether the warranty term is written on the invoice.
Should I repair or replace my range hood?
Apply the 50% rule. A new range hood averages $350 in the US and lasts about 14 years, so a repair quote over roughly $175 on a unit past 9 years old is usually money better spent on a replacement. Below that line, with life left on the clock, repair almost always wins. Ask for parts and labor as separate figures — it is normally the part, not the hours, that pushes a quote past the threshold.
What should I have ready before calling a range hood technician in Connecticut?
Ducted or recirculating — this decides what the hood can physically do. The duct route: how long, how many bends, and whether it is rigid or flexible. Whether the fault is the fan, the light, or the extraction performance. Having those three answers ready is what turns a diagnose-then-return-visit into a single trip.

Need a range hood repaired in Connecticut?

Compare 1 listed business on rating, licensing and brands serviced — 1 state a license and 1 sit at 4.5 or better — then call the number on the listing. No forms, no lead fees.