It Is Fixed Appliance Repair
14 yrs in businessAtlanta, GA
Refrigerator Repair · Washer Repair · Dryer Repair +6 more
Georgia · 41st of 45 states
1 listed ice maker repair business across 1 city in Georgia, ranked by customer rating — 5% of everything this directory holds for the state, and 41st of the 45 states with any. Compare licensing and review counts, then call directly. Free, and no commission.
Water hardness is regional and it is the main driver of ice-maker failure. A local technician will already know whether scale is the story in your area.
Sorted by rating, then review count. Every phone number is a direct line to the business.
Atlanta, GA
Refrigerator Repair · Washer Repair · Dryer Repair +6 more
That is 41st of the 45 states with any, against 11 in Texas. Ice maker work is a narrower speciality than the everyday kitchen and laundry calls, so coverage is thin in most states. 18 other appliance businesses are listed in Georgia, and general technicians will often take this work once they know the model. Have the model number ready when you call.
Counted from the 1 profile above, not from a survey. Everything a business states about itself is reported as a claim.
Georgia holds a single listed ice maker repair business, out of 147 nationwide. That ranks 41st of the 45 states with any, behind Washington on 2 and Texas on 11. It is 1 of the 19 businesses listed in Georgia — 5% of the state directory.
It carries a 4.9 rating, against 4.6 across all 147 listed nationwide. It carries 1,247 reviews. Rating and review volume are what the businesses' own public profiles report — treat a high average on six reviews differently from the same average on six hundred.
The listed business states that it is licensed and states that it carries insurance. It does not advertise round-the-clock cover, but it does advertise same-day service. All of that is self-stated in the listing, not verified here: ask for the license number and a current certificate of insurance, and for anything that opens a sealed refrigerant system ask to see federal EPA Section 608 certification, which is required in all fifty states.
It has been trading since 2012 — 14 years. It works out of Atlanta. It names 8 distinct towns, suburbs and neighborhoods in its stated service area, so its reach is wider than the town it sits in — give your address when you call.
| Measure | Georgia |
|---|---|
| Listed prosof 147 nationwide for ice maker repair | 1 |
| Rank among statesTexas leads on 11 | 41st of 45 |
| Share of the Georgia directory1 of 19 listed businesses | 5% |
| Average rating4.6 nationwide · 1 rated 4.5+ | 4.9 |
| Reviews on filemost on one profile: 1,247 | 1,247 |
| State licensing claimed1 also states insurance | 1 of 1 |
| 24/7 emergency1 advertise same-day | 0 of 1 |
| Longest trading sincemedian 14 years across 1 that publishes one | 2012 |
| Cities with an index pageAtlanta leads on 1 | 1 |
| Towns named in service areasclaimed coverage, not a guarantee — confirm your address | 8 |
Not counted above
These are real Georgia companies whose records carry contact details but no list of what they repair. None of them states ice maker repair, so none is counted in the 1 above, and none is listed here as servicing one. Asking takes one phone call, which beats starting the search again.
Details for these businesses come from OpenStreetMap under the Open Database License © OpenStreetMap contributors. We hold no rating, licence or insurance details for themeither — confirm before hiring.
Counts are ice maker repair businesses based in that city.
Every place the 1 listed business name in their own service areas. Claimed coverage, not a guarantee — confirm your address on the call.
Alpharetta · Atlanta · Buckhead · Decatur · Marietta · Midtown · Roswell · Sandy Springs
The 5 most common ice maker faults, and whether each is homeowner work or a job for a licensed technician.
No ice at all, mould is dry
TechnicianNo water arriving: a closed shut-off, a kinked supply line, a frozen fill tube, or a failed water inlet valve.
Step-by-step: Ice Maker Not Making Ice→Cubes are small, hollow, or only partly formed
Homeowner fixLow water pressure, a clogged filter overdue for replacement, or a partially blocked fill tube.
Step-by-step: Ice Maker Slow or Making Small Cubes→Ice smells or tastes stale
Homeowner fixAn overdue water filter, or ice that has sat long enough to absorb freezer odours. Ice is porous and picks up everything around it.
Mould fills with water but never ejects
TechnicianThe icemaker module, the mould thermostat, or the ejector motor. On most units the module is replaced as one assembly.
Step-by-step: Ice Maker Not Making Ice→Ice cubes fused into one solid block in the bin
TechnicianSlow usage plus a freezer running slightly warm, or a leaking fill valve dribbling water into the bin between cycles.
8 published ice maker guides. A diagnostic fee is $50–$100 before any work starts, so half an hour with a flashlight is worth spending.
Ask the technician to walk you through these while they are on site — every one of them prevents a fault in the list above.
Replace the water filter on schedule
Every 6 monthsPrevents: Small hollow cubes, slow fills, and a strained inlet valve.
Empty the bin fully and let it refill
MonthlyPrevents: Fused blocks of ice and stale-tasting cubes.
Check the supply line for kinks behind the fridge
After any movePrevents: The most common no-ice call after a kitchen reshuffle.
Counts are Georgia businesses servicing that appliance, out of the 19 listed statewide. A dash opens the nationwide page instead.
Every state with a listed ice maker specialist, most first. Georgia sits 41st of 45 on 1.
National ranges for parts and labor together, before the $50–$100 diagnostic. Labor tracks local wages and drive time, so metro Georgia sits toward the top of each range and rural calls toward the bottom, while the part costs about the same anywhere. Nothing here is a quote.
| Repair | Parts + labor |
|---|---|
| Thaw a frozen fill tube and clear the supplyOften the entire fix on a no-ice call. | $80–$160 |
| Water filter replacement and pressure checkCheapest cause of small or hollow cubes. | $60–$140 |
| Water inlet valveThe single most common ice-maker part failure. | $150–$300 |
| Icemaker module or ejector assemblyUsually supplied and replaced as one unit. | $200–$400 |
| Mould thermostat or bin-level sensorSymptom is a machine that fills but never harvests. | $150–$300 |
| Complete in-fridge icemaker assemblyOften cheaper than chasing individual parts on an older unit. | $250–$450 |
5–10 years for an icemaker inside a refrigerator — noticeably shorter than the fridge around it. Standalone and undercounter machines reach 10–15 with proper descaling. When replacing beats repairing covers the 4 cases where the maths turns, in full.
Blue Book
A quote above $200 on a ice maker past 5 years old is usually better spent on a replacement.
Estimate my ice maker’s valuePrice the part firstCompare 1 listed business on rating, licensing and brands serviced — 1 state a license and 1 sit at 4.5 or better — then call the number on the listing. No forms, no lead fees.